SEARCH   Site Map | Search Tips

About us | News | Careers | Contact Us

 

Digital Audio Broadcasting

Bluetooth

Fiber Optic

Gigabit Ethernet

IEEE 1588

Oscillators For Synchronization Chipsets

Synchronization Modules

WLAN

Raltron Chipset Cross Reference


Applications > Fiber Optic
 

 
  Fiber Optic  
 
Fiber Optic Solutions
In today's expanded era of the data communication - Internet world, the need to support heavy load and high speed of video/data transmission is an essential requirement. Optical Networks, such as SONET/SDH, are most common infrastructures that support this heavy load of traffic data. As the network's speed increases the transmission frequency increase at the same proportion while the requirements to maintain low transmission noise are still applicable. In reality, high capacity transmitting systems are more susceptible to noise, due to high rate of transmission, and a special care is required when integrating such systems. In order to maintain low noise and transmission quality, each network must utilizes an internal frequency source with a low jitter capabilities and/or ability to clean recovered network reference signal following the clock recovery process. Raltron Electronics Corporation offers number of time and frequency products that supports optical transmission network requirement;

(Click on the images below to view their specs)

VE7850A - Click to View PDF VE8850A - Click to View PDF VH580A - Click to View PDF CE7850A - Click to View PDF CE8850A - Click to View PDF VS8950A - Click to View PDF CLD Series - Click to view PDF

CLICK PACKAGE FOR SPECIFICATION

  1. High frequency VCXO device at various frequencies applicable for high-speed telecom transmission systems (Examples: OC3:155.52MHz; XDM: 166.6285) with jitter performance of < 1pS RMS - using an Inverted Messa HFF (High Frequency Fundamental) crystal technology. (VC/VE7850- a Dip 14 pkg; VC/VE8850- a SMT 9mm x 14mm x 5.5mm pkg)
 
2. High frequency Clocks device at various frequencies applicable for high-speed telecom transmission systems (Examples: OC3:155.52MHz; XDM: 166.6285) with jitter performance of < 1pS RMS using high frequency Overtone crystals technology. (CO/CE7850- a Dip 14 pkg; CO/CE8850- a SMT 9mm x 14mm x 5.5mm pkg)
 
3. High frequency VCSO device at various frequencies applicable for high-speed telecom transmission systems (Examples: OC192:622.08MHz/666.513) with jitter performance of < 1pS RMS - using a SAW based technology. (VS8950- a SMT 9mm x 14mm x 5.9mm pkg)
 
4. Gigabit Ethernet clocks with low jitter at various pkgs. (see: Gigabit Ethernet)
 
5. Timing and synchronization modules. Software/Hardware family solutions for backbone switching applications (SDH;ATM; routers) with a low jitter/wander generations as per Belcore G1244; ITU-T G-813 (options 1&2); ITU-T G-812 (see: Timing Solution)



Raltron has the technology
and engineering expertise
to meet your Fiber Optic
application requirements
.

 
 


Home | Products | Applications | Customer Care

Copyright © 1983-2017 by Raltron Electronics Corporation
Questions, comments to contact us
clock oscillators, crystals, tcxo, vcxo, ocxo, vco